|
Click To Enlarge
|
|
|
|
|
|
|
|
|
|
| Product Information | ||
| P/N. | 002-0125 | |
| Item Name | Universal MAMBA GTX2863R Ball Bearing Turbocharger with .42 Cover & .64 T25 Internal Gate Turbine Housing | |
| Situation | Brand New In Box | |
| Spec | Comp. Wheel : 47.1 mm / 63.4 mm/Trim 62 (11+0 GTX Billet Wheel w/ Extend Tip) | |
| Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76 | ||
| Compressor Housing Inlet OD: 59.9 mm / 2.36" | ||
| Compressor Housing Outlet OD: 2” / 50.8 mm | ||
| Compressor Housing A/R: .42 | ||
| Turbine Housing A/R : .64 | ||
| Turbine Inlet Flange : 25 | ||
| Turbine Outlet Flange : 5 Bolt | ||
| Application | 1.5~2.5L Gasoline engine / 3~4L Diesel Engine | |
| Support 250~350 HP | ||
| Bearing system | NTN Ceramic Dual Ball Bearing | |
| Cooling System | Oil and Water-Cooled | |
| Actuator | 0.8bar spring is pre-installed on actuator. | |
| 1.2bar and 1.5bar spring will go with box that user can change it easily. | ||
| Can Kit Includes | 1 x 70cm Oil Feed Line Kit with 1.0mm Restrictor | |
| 2 x Water Feed / Return Line Kit | ||
| 1 x Turbo Oil Return Pipe Kit | ||
| 1 x Turbine Inlet Gasket | ||
| 1 x Turbine outlet Gasket | ||
| 5 x Stud Kit with copper-coated nut | ||
| 3 x Adjustable Actuator Springs | ||
| 1 x CHRA Balance Sheet | ||
| Everything shown on picture is included | ||
| Made By | MAMBATEK | |
| Warranty | One year | |
No Reviews. Write a Review
